Laser sintering of blended Al-Si powders

Journal article

Authors / Editors

Olakanmi, Eyitayo

Research Areas

No matching items found.

Publication Details

Author list: Olakanmi EO, Dalgarno KW, Cochrane RF

Publisher: Emerald

Place: BINGLEY

Publication year: 2012

Journal: Rapid Prototyping Journal (1355-2546)

Journal acronym: RAPID PROTOTYPING J

Volume number: 18

Issue number: 2

Start page: 109

End page: 119

Number of pages: 11

ISSN: 1355-2546

Languages: English-Great Britain (EN-GB)

View in Web of Science | View on publisher site | View citing articles in Web of Science

Abstract

Purpose - The purpose of this paper is to study the effects of particle size distribution, component ratio, particle packing arrangement, and chemical constitution on the laser sintering behaviour of blended hypoeutectic Al-Si powders.Design/methodology/approach - A range of bimodal and trimodal powder blends were created through mixing Al-12Si and pure aluminium powder. The powder blends were then processed using selective laser sintering to investigate the effect of alloy composition, powder particle size and bed density on densification and microstructural evolution.Findings - For all of the powder blends the sintered density increases with the specific laser energy input until a saturation level is reached. Beyond this saturation level no further increase in sintered density is obtained for an increase in specific laser energy input. However, the peak density achieved for a given blend varied significantly with the chemical constitution of the alloy, peaking at approximately 9 wt% Si. The tap density of the raw powder mixture (assumed to be representative of bed density) was also a significant factor.Originality/value - This is the first study to consider the usefulness of silicon as an alloying element in aluminium alloys to be processed by selective laser sintering. In addition the paper outlines the key factors in optimising processing parameters and powder properties in order to attain sound sinterability for direct laser sintered parts.

Keywords

Additive manufacturing, Alloys, Aluminium alloy, Hypoeutectic Al-Si powders, Particle size measurement, Selective laser sintering, Sintering

Documents